 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
A liitle more information. We have a heat pump furnace and the old thermostat is a GE Weathertron. We bought a honeywell programmable thermostat. The wires we have are T,X2,O,B,G,W,Y,R. The T wire does not correspond to anything and we do not have a wire to go into the L terminal. We bought a Honeywell RTH7400D thermostat. Here is how we hooked it up: Nothing in RC - R wire to R | O wire to O/B |Y to Y| G to G |B wire to C |Nothing in L |X2 wire to E |W to Aux | T wire to nothing. IS this correct? We are afraid to turn the electric back on for fear of blowing something.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I would like to have my heat pump controlled by the centrally located main thermostat during the day, but switch to a different thermostat located in my bedroom during the night. Is this possible and how would I go about wiring it? I was hoping it may be a readily available kit?
A/C died over the weekend. Repair guy checked the system and found "the compressor seemed to be drawing high AMPs". Replaced a blown fuse and then quoted me $4800 for a whole new system. Quoted Armana Distinctions 70,000 BTU 95% furnace, 2.5 ton 13 seer condenser, coil and pump. Figured that I...
My house is heated by a heat pump. In cold months are bill is almost $500 and we have to wear sweat shirts. I am considering to bring a gas to the house and replace the furnace for a gas furnace. Whole project is going to cost about $10,000. Is it a good investment? Should I keep the heat pump and...
I have a American standard thermostat (ASYSTAT655A)& I have been wanting to update to a digital thermostat. I bought a Honeywell RTH3100C thermostat and have most of the thermostat wires hocked up with the help of a friend.My only problem is My Air conditioner will come on and just stay on even on...
View more questions Search
|
