Ask Experts Questions for FREE Help !
Ask
    ebhawkins2001's Avatar
    ebhawkins2001 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 24, 2008, 07:54 AM
    Shower stems
    I have a mixit single handle shower faucet, i am trying to remove the stem to replace it, i have tried to remove the bonnet and the stem but it won't budge, what should i do before i spend the money for a plumber.:mad:
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Jul 24, 2008, 02:30 PM
    Hi Ebhawkins:

    Hey... you got the handle off... yes?

    What tool are you using to remove the NUT.. You should be able to use a SOCKET set with correct size socket or you could go purchase a plumber's shower valve/stem wrench set (about $20.00 or less at home depot... see pictures below).

    Basically, the nut should come off without too much issue if you have the right tool.

    Let me know what you think...

    MARK
    Attached Images
      
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bathtub stems [ 1 Answers ]

My two bathrooms have very different stem types. On one, the water drips while the water is on. I want to change the stem, but it is something I have never seen. It is a stem that cannot unscrew. It is mounted to the pipe. What I see is the stem coming out of the wall. I see the screw threads...

Removing old stems in shower [ 1 Answers ]

There is a leak in the wall behind our shower. The handyman couldn't remove the existing handles to fix it because he said the stems had been glued to the handles. What should we do? This house is over 30 years old. You can physically see the glue in and around the handles.

Replacing Shower Valve Stems/Seats [ 1 Answers ]

Since the valve stems don't have a brand name anywhere on them I am concerned I may get the wrong size or thread type. Are plumbing parts consistent all across the board? I just can't seem to get this drip to stop completely. I can slow it down, but the washer ends up getting wrecked in about 3...

Valve stems [ 3 Answers ]

Do I need to shut off main water when changing valve stems in a shower?

Replacing Shower Knobs & Stems [ 2 Answers ]

I am currently renting a condo that the landlord had bought replacement knobs for the shower before moving, but didn't have time to install them. He is out of state. I tried putting them on but they were the wrong ones and I happened to strip the brass parts that the knobs tighten up to. When I...

View more questions Search