Ask Experts Questions for FREE Help !
Ask
    faridse's Avatar
    faridse Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 23, 2008, 10:18 AM
    99 honda accord whit p1381 code
    I have a 99 honda accord an my check engine light is on whit the code 1381.I change the distrobuter plug wire,cape.I drove 60 miles the same code came back on .what should I do now??
    adam_89's Avatar
    adam_89 Posts: 1,866, Reputation: 280
    Ultra Member
     
    #2

    Jul 23, 2008, 10:22 AM
    I had my engine light on at one time, and it still drove fine, but I had it checked and they told me what was wrong, but said I should leave it alone if it was driving fine, because it could cause me more problems. Eventually my light went off and then back on about 1000 miles later, but now it is off and stays off. I had a '99 Saturn. Does your's still run fine?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #3

    Jul 23, 2008, 10:29 AM
    P1381--Cylinder Position Sensor Intermittent Interruption

    This sensor is likely inside the distributor on your Accord. You need to confirm this. This non-serviceable sensor likely requires the distributor to be replaced. Check all electrical connections first. Go with a genuine Honda distributor housing and install your old ICM and coil.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honda Accord Audio code [ 6 Answers ]

Hi, I have recently changed my Honda accord's bartery. I forgot the code to enter for Audio. I have entered wrong code and it seems like it is locked. Now I found my audio code and I don't know how to enter. The preset buttons are not responding when press them to enter the correct code. Please...

Honda accord radio code [ 1 Answers ]

Hi I need radio code of honda accord 3.0 coupe model 99

91 honda accord error code 9 [ 9 Answers ]

I bought a 91 honda accord its giving a aerror code 9 and seems to shift a little out of time. Are these related to the error code or should I look at the tcu for repair. Anyway help I just want to et rid of my error code:eek: :cool:


View more questions Search