Ask Experts Questions for FREE Help !
Ask
    ishyboy's Avatar
    ishyboy Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 12, 2008, 06:38 PM
    how much sheathing
    10x30 deck, 5/12 pitch, how much osb for roof
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jul 12, 2008, 07:22 PM
    10 4x8 sheats

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electrical wire Sheathing [ 2 Answers ]

Question is Electrical wire sheathing should not project more than about 1 inch into the: A. plumbing line B. floor joist C. electric panel D. Ground

Electrical wire sheathing [ 1 Answers ]

My question is Electrical wire sheathing should not project more than 1 inch into the?

Insulated sheathing boards [ 2 Answers ]

Has anyone had any experience with the polyisocyanurate foam sheathing boards ? I'm considering using one of the R4 rated .6" boards over a standard rigid wafer type sheathing before attach the fiber cement planked siding. Would a exterior wrap such as Permawrap also be helpful ? Can a wavy effect...

Sheathing preferences [ 5 Answers ]

We are putting a 2 story addition on that will include a garage on the first floor and a walking closet/master bath expansion on the second. The bid referenced OSB sheathing on the exterior walls/roof and floor deck. The contractor decided to install Bild-Rite sheathing on the exterior walls...

Replace sheathing on garage [ 1 Answers ]

I have a garage roof that has completely rotted. Pulling off the plywood sheathing, I see that the surface of the 2x6 rafters is rotted. This is a stupid question, but I can't figure out is how the rafters are attached to the center beam. I can't see any nail holes. Have I not looked hard enough?...


View more questions Search