Electrical wire sheathing

Topher3 Posts: 5, Reputation: 1

New Member

Sep 8, 2007, 06:51 PM

Electrical wire sheathing

My question is Electrical wire sheathing should not project more than 1 inch into the?

tkrussell Posts: 9,659, Reputation: 725

Uber Member

Sep 8, 2007, 06:53 PM

See:

https://www.askmehelpdesk.com/interi...ng-127368.html

Add your answer here.

Check out some similar questions!

Electrical wire size for spa [ 12 Answers ]

Hello, I am wiring up my spa and looking at what info I have (GE / Cutler Hammer) they say for a spa (240) use a 50amp breaker (which I have) and use 8/3 size wire. But looking at my spa where you hook the power up it says use 6 AWG minumin? So which should I use from the house to the breaker...

Wire for electrical stove [ 10 Answers ]

Hello can you tell me what size # wire I need for a 220 that an electrical stove will run off? The breaker is a double 50. I think that the wire that is there now is too small for the breaker. I think that when more than one burner is in use they don't work properly. One will cool down while the...

Electrical wire Sheathing [ 2 Answers ]

Question is Electrical wire sheathing should not project more than about 1 inch into the: A. plumbing line B. floor joist C. electric panel D. Ground

Wire size on 200 amp electrical service [ 1 Answers ]

I am installing a single phase, 200 amp service on a new summer home that I am building. My question is about wire size for wire running from the meter pan to the breaker panel. I am told that I need 2/0 wire for each phase, but an electrician told me that I can drop down one size (1/0) for the...

Tracing a wire in a electrical 'bus' [ 2 Answers ]

Hi, sorry for the confusing title. Here is the situation. I have 2 lights in my downstairs, one at the top of the stairs and the other at the door. I would like to add a 3 light between the two lights so I have more light in the hallway. The thing is I have a access panel in the hallway but...