Ask Experts Questions for FREE Help !
Ask
    hj3's Avatar
    hj3 Posts: 92, Reputation: 2
    Junior Member
     
    #1

    Jul 9, 2008, 01:38 AM
    IDE to SATA Converter Card How-To
    My computers internal hard drive is ide. I heard that with an IDE to SATA converter card, you could make your ide drive perform at SATA drive speed and all you have to do is plug in the converter card in the back of the ide drive, and connect the sata cord on the other end into the SATA port on your motherboard. I did just that. I connected the ide end into the hard drive, and made the SATA connection into SATA 1 since no other SATA connections were being used. Then I plugged in the plug. When I powered up my computer, the SATA card light lit bright orange. My computer couldn't read the hard drive, thus I had to disconnect the SATA card, reconnect the ide cable and my computer booted up like normal when I powered it up again. How could I get my computer to operate with the hard drive moving at SATA speed with the IDE to SATA adapter plugged in - or are IDE to SATA adapters a bunch of hype?
    Scleros's Avatar
    Scleros Posts: 2,165, Reputation: 262
    Hardware Expert
     
    #2

    Jul 9, 2008, 04:06 PM
    Quote Originally Posted by hj3
    I heard that with an IDE to SATA converter card, you could make your ide drive perform at SATA drive speed
    Yes and no. First generation SATA has max speed of 150 MB/s. Max speed of PATA/133 is 133 MB/s. Theoretical difference of 17 MB/s. In practice, using a desktop drive, its sustained read and write performance will be significantly less than either interface maximum, so you're unlikely to see any real performance difference, as the drive itself is the limitation. The only time when SATA would have an advantage would be situations where the data is already in the drive's cache and the drive can burst up the interface maximum. Desktop usage profile tends to be too random for cache hits to makeup the majority of data requests.

    Quote Originally Posted by hj3
    ...are IDE to SATA adapters a bunch of hype?
    Adapters allow PATA drives to be connected to SATA controllers. They are not for performance gain. Provided you have a quality adapter and everything was powered properly, it should have worked. You might double-check your BIOS options for how your SATA and PATA controllers are enabled, emulated, which is bootable, etc.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #3

    Jul 9, 2008, 05:04 PM
    Nice job.

    Speed is determined by the smallest pipe. e.g. the device with the slowest speed

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Prob with sata [ 1 Answers ]

Last week I bought a new system with sata hdd 160 .When I try to install xp .It shows an error message and setup has been cancelled ? It shows some errors in blue screen...

Is there a pci sata II Card? [ 1 Answers ]

I'm thinking of buying a bigger hard drive, Sata II 500 gb. However, My motherboard has a serial sata 150 controller which is only up to 150 MB transfer speed. I want to utilize the new sata II 3gb transfer speed of that new drive. Is there a pci sata II card and where can I purchase one? Must...

220gb sata hd failure [ 1 Answers ]

It's been about half a year now that I've had my computer which I built myself up and running. It's running on Intel Pentium 4 processor and an Asus mobo, 1GB of ram and two HD's. The two HD are 1) Western digital 120GB PATA and a 220 Western digital SATA drive. I had noticed that recently when I...

Sata problems [ 6 Answers ]

I just bought a new computer system: sapphire pure crossfire advantage mobo AMD athlon 3800+ skt939 radeon X850XT PE Maxtor 250gb sata hdd The problem I am having is that I can't install windows onto the sats hdd. When I get to the windows XP install screen it says that "windows cannot be...

Sata Raid [ 1 Answers ]

Hello, Looking for a laymans explanation of SATA RAID and why it would be good to have in a Hi end DAW PC. Thanks Stu


View more questions Search