Ask Experts Questions for FREE Help !
Ask
    knightofni's Avatar
    knightofni Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 25, 2008, 02:51 PM
    Fuel mix for a Homelite string trimmer
    I was given a Homelite ST-200 20501-A string trimmer minus the manual, and I have no clue what the ratio for the fuel mix should be. Any ideas?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Jun 25, 2008, 05:56 PM
    You can purchase some "super" mixing oil that is suppose to work on all ratio mixtures.
    Northern Mike's Avatar
    Northern Mike Posts: 44, Reputation: 4
    Junior Member
     
    #3

    Jun 25, 2008, 10:37 PM
    I use Opti2. I have had very good luck with it. I use it in my weedeater, also my outboard motor and any 2 cycle motor. I swear by it,
    Mike
    moon montana's Avatar
    moon montana Posts: 2, Reputation: 1
    New Member
     
    #4

    Aug 16, 2008, 11:02 AM
    16:1 Ratio or 8oz of gas per gallon of gas.

    Part no for manual is 17699-A.

    These trimmers are 26 years old and parts are hard to find.

    MM
    Frobert's Avatar
    Frobert Posts: 2, Reputation: 1
    New Member
     
    #5

    Sep 7, 2008, 12:34 PM
    Quote Originally Posted by moon montana
    16:1 Ratio or 8oz of gas per gallon of gas.

    Part no for manual is 17699-A.

    These trimmers are 26 years old and parts are hard to find.

    MM
    I need the size of the brushcutter blade this trimmer uses, not the tri-arc but the saw blade.
    moon montana's Avatar
    moon montana Posts: 2, Reputation: 1
    New Member
     
    #6

    Sep 14, 2008, 10:17 AM
    Homelite 8" Saw Tooth Blade

    Part No 94469-1

    5/8" diameter hole for arbor.

    Moon
    ALFitz's Avatar
    ALFitz Posts: 1, Reputation: 1
    New Member
     
    #7

    Dec 29, 2009, 02:48 PM
    I have New in package 8" Saw Tooth and Tri-Arc blades - ex took the trimmer and these were packed.
    Homelite Part #D98717-A Brand New weed eater 8” TRI-ARC Blade fits ST-185, ST-385 & ST-485 Wizard HLT-2037A78, HLT-2037A88, HK-18, HK-24, HK=30, HK=33Brushcutter Attachment
    Homelite Part #D98935-A Brand New weed eater 8” Saw Tooth Blade fits ST-185, ST-385 & ST-485 Wizard HLT-2037A78, Brushcutter Attachment
    rmnorman's Avatar
    rmnorman Posts: 1, Reputation: 1
    New Member
     
    #8

    Sep 14, 2010, 10:09 PM
    Have a manual from an ST200 purchased in the eighties. Will copy and fax if you are still in need.
    cavie69's Avatar
    cavie69 Posts: 1, Reputation: 1
    New Member
     
    #9

    Jun 9, 2011, 12:42 PM
    I have a homelite st 200 string trimmer I need the tube that the shaft is in where can I find one

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Homelite string trimmer problems [ 4 Answers ]

I have a Homelite TrimLite string trimmer that's three years old. It worked without any problem for more than a year, and, believe me, I put it to the test! However, after letting it sit without using it for maybe six months, I could not get it started again. There was a cracked fuel line from...

Homelite string trimmer [ 1 Answers ]

Hey, Please help... I have a petrol string trimmer, model homelite f2020. The problem is that in the 2 uses it has had, the string spool get jammed. i.e. I can not unscrew it to replace the string! It is now the second time it has happened what is going on with that, its so tight it is not...

Homelite String Trimmer Fuel Mix [ 1 Answers ]

I need to mix new 2 cycle fuel for my Homelite UT20760 Trimmer (curved). The operators manual is lost. Who knows the proper gasoline:oil ratio? (32:1, 40:1, 50:1, etc.) Yip :confused:

Homelite dual feed trimmer string [ 1 Answers ]

What is the proper way to install/ replace string in a dual feed trimmer?

Homelite Trimmer [ 3 Answers ]

I let my neighbor borrow my weed trimmer. Now it will not feed line. I use to could bump it on ground and it would automatically feed line. Could he had taken trimmer end apart and lost something? All there is is a spring under trimmer head.


View more questions Search