Ask Experts Questions for FREE Help !
Ask
    boliver22's Avatar
    boliver22 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 23, 2008, 09:25 AM
    Kenmore series 80 electric dryer won't turn on
    Used it yesterday, today I push the start button and nothing happens, I am told there is a reset switch, where is it?
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
    		  
    #2

    Jun 23, 2008, 06:50 PM
    Normally at the rear panel. Have a look there ! The reset switch indicates that the system got too hot : defluff it before every cycle !

    Success !
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 600 series dryer - electric [ 4 Answers ]

Hi There folks I have abrand new Kenmore 600, electric dryer. I have a problem with the dryer. The first I used it, it was fine.Then after a few days when I tried to push the switch it turns on but when I remove my finger from the switch, it turns off.

Heating element Kenmore 70 series electric dryer [ 6 Answers ]

When I start the dryer the heating element gets hot for about 5 seconds then blows a fuse. The dryer will still cycle, but never get hot again. I replaced the fuses and no luck. When I took the plate off I can see that it is getting hot. There are 5 coils and it appears that the top 3 coils are...

Kenmore electric dryer won't turn on [ 1 Answers ]

I have a model number 66901691 Kenmore electric dryer. I have owned it for about 6 years. It will not turn on. The repair min. fee from Sears is $60. It is better to let them come out - or buy new? What could the problem be and what might the cost be? Any help is appreciated. Sharon

Kenmore electric dryer series 70 [ 1 Answers ]

I cannot find the fuses it drescribes to look for on the dryer in case of no heat! Can someone help me?

View more questions Search