Ask Experts Questions for FREE Help !
Ask
    leoj321's Avatar
    leoj321 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 20, 2008, 03:47 PM
    Priming my sprinkler pump
    Hello I am Joel Anderson and I use a well only to irrigate my yard.Ok it has not rained in quite some time.For this area we are only approx. 6 inches below for this time of year.I noticed that 1 week ago when my pump was running at the same time as my neighbors.My sprinklers was not spraying as far as normal. So I changed the time frame.that helped a lot and back to normal.That lasted for about one week.Then it stopped spraying.Now I have no water so I turned off the pump.I can still hear the pump opperating now.So it is not burnt up.So now I would like to find out on how to prime the system.We have gotten about2" of rain since it stopped rainning.And we are going to get a lot of rain in this week forcast.So I do want to try and take care of this by the next weekend.So please let me know the procedure. I do not have a self priming pump.So now I am lost.Thank you guys for being there for me.Hope to hear from you soon.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jun 20, 2008, 05:15 PM
    Look on the top of the impeller cage and see a 1/4" plug, or it might be a gage.
    Remove it and pour wateri it until it overflows. Now replace the plug/gage and start the pump. If you can't fill the impeller cage up then you have a faulty check/foot valve. Good luck, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Priming lawn sprinkler pump [ 1 Answers ]

I can't get the pump on my lawn irrigation system to hold a prime. I replaced the check valve but still not working. What should I do? Thanks-Roosgurl

Priming the pump [ 1 Answers ]

My parents are out of town and when I came to check on the house I went to the restroom and flushed, it wouldn't no water was in the tank, I have heard my dad talk about sometimes he has to prime the pump, I'm wondering how I do this?

Priming Sprinkler Pump [ 2 Answers ]

I have just replaced my 2 hp sprinkler pump and all of the line leading from the ground. I did replace my check valve. I cannot get my pump to prime. I did check for air and I did fill the pump with water. I have done this before with no problems except for changing the check valve. Any...


View more questions Search