Ask Experts Questions for FREE Help !
Ask
    mosdesai's Avatar
    mosdesai Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 20, 2008, 03:58 AM
    Romex wire
    Can I run a romex wire through a subfloor?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Jun 20, 2008, 09:14 AM
    Yes, but you must use a piece of conduit to protect the cable as it travels between floors.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Stapling romex wire [ 11 Answers ]

How many romex wires (12/2, 14/2, 12/3, 14/3) can you staple by code? Can you staple 3 12/2 wires using one staple? Can you staple 3 14/2 wires using one staple. Thanks

Romex wire/amp issue [ 3 Answers ]

I am replacing a 30" kitchen range with a new 48". The existing wiring is approximately 30' of romex NM-B 8/3 on a 40 amp breaker. The new range requires as follows: Maximum connected load: 10.2 kW for 48". Required power supply: 240V/208V/50A/60Hz for 48". Minimum supply wire size: L1 and...

Romex wire [ 2 Answers ]

Is Romex Wire Legal In New York City?

Hard wire 3 wire to 4 wire 220 service [ 1 Answers ]

How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?

3-wire home, 3-wire fan, 2-wire remote [ 9 Answers ]

Greetings, My home is 3-wire. I bought a Hunter ceiling fan (model 23811). The fan came with a remote assy. That I do NOT want to use... The fan has standard 3-wire connections (black, white, blk&white strip, ground). The remote receiver home-side wiring looks to be for 2-wire (blk and white)....

View more questions Search