Ask Experts Questions for FREE Help !
Ask
    sunridezephyr's Avatar
    sunridezephyr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 16, 2008, 05:06 PM
    Kenmore fills,spins,drains won't agitate
    Kenmore fills,spins,drains won't agitate.. big round white thing that agitates in the tub is trying to move.. no noise.. seems to turn freely.. any ideas?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jun 16, 2008, 05:15 PM
    The cams (dogs) are bad. Remove the agitator and separate the agitator. Relace for about $15.00 and 30 minutes of time
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool washer spins as it drains [ 1 Answers ]

My Whirlpool washer is old but I haven't had trouble from it until now. Model# A5550XPW7... serial#CX2964691. It leaves water in the tub at the end of the wash and rinse cycle. More water with each cycle. Yesterday I took off the hoses and checked for blockage and nothing. It drained the standing...

GE Washer Fills and Spins but does not Agitate [ 1 Answers ]

I have little experience with appliances, but before getting a new washer, I was wondering what might cause a GE washer to be able to spin and fill, but not agitate. Could it be something that I could fix on my own? I hear and see it trying to agitate, but it kind of makes a whirring noise and...

Washer spins while it drains and leaks [ 1 Answers ]

My wife had a problem with our Kenmore washer model number 110.26914691 with water all over the floor during a large cycle. I took it outside and checked to see if there were any leaks in the hoses or tub. There were none. I removed the cabinet and ran a small load test cycle. I was able to confirm...

View more questions Search