Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I install a hot and cold valve stem for a bathtub?
[ 8 Answers ]
I need to know if anyone can send me the steps for installing hot and cold valve stems for a bathtub and if you can send a diagram of a normal bathtub bathtub and what each part is so I can help my brother-in-law and sister get their bathtub fixed. Please respond as soon as you can. Thanks.
Replaced hot water stem in shower and now no water.
[ 3 Answers ]
I am trying to replace the hot water stem in my bathtub and I got it changed out and when I turned the water on nothing. Took it off and turned the water on and water sprayed out and again I put it on and nothing. I am a complete novice with this, there is another piece that came with the stem...
Stem for hot water
[ 1 Answers ]
When you replace the stem for the hot water, do you have to use a sealer or what? Thanks
Diverter stem replace
[ 1 Answers ]
I Already Change The Diverter Stem On My Bathroom Shower. I Installed A New One (sayco). It Works Ok, Except When I Rotote It To Change And Send Water Only On Top Shower, Because It Send Also Water To The Bottom Shower (both ways). Do It Have Any Particular Way To Install It? Do I need to...
Need to replace shower hot and cold knobs
[ 1 Answers ]
My house is a little over 50 years old. The shower leaks water from the tub faucet when it is set to come from the shower head. Also the water never fully stops leaking even when the knobs are set to off. I think the wahers are old and have read about replacing "seats" online but can't figure it... View more questions Search
|