Ask Experts Questions for FREE Help !
Ask
    marycontrary's Avatar
    marycontrary Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 9, 2008, 03:03 PM
    Washing machine agitator removal
    I have a Maytag top loading, heavy duty machine. I need to retrieve something under the agitator. It is ten years old.

    How do I get the agitator off...

    Thanks.;)

    >Moved from Forum Help<
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jun 9, 2008, 03:27 PM
    Look near rear bottom of the agitator itself. YOu will have to feel for it as it is naxt to impossible to see but there will be a bolt or allen screw to remove,then just pull up on agitator
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Agitator removal [ 1 Answers ]

We have a GE 149 Clothes Washer and there is a small shirt wrapped around the agitator. How do I remove the agitator to get to the shirt?

Washing machine knob removal [ 1 Answers ]

I need to know to remove the timer knod on a Whirlpool clothes washing machine?

Toilet closest to washing machine gurgles and backs up when washing machine drains. [ 2 Answers ]

When the washing machine drains, the toilet in the next room gurgles and the bowl partially fills. I have taken these steps: Ran hose down vent pipe on roof. No backup noticed. Had plumber snake from outside wall cleanout by washing machine and 1/2 bath toilet to city sewer line in alley,...

Washing machine agitator runs constantly [ 1 Answers ]

I have a Kenmore Elite washer. Lately, the agitator will run immediately when the washer is started.

Kenmore agitator removal [ 1 Answers ]

Hi Everyone says the same thing... remove the cap remove the sofner dispensor(if there), and then... presto there is the bolt, remove the bolt and slide agitator up and off. My problem is the bolt just seems to spin and spin and spin, if I hold the agitator, the bolt never comes off it just...

View more questions Search