Ask Experts Questions for FREE Help !
Ask
    Anything's Avatar
    Anything Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 6, 2007, 02:51 PM
    Washing machine knob removal
    I need to know to remove the timer knod on a Whirlpool clothes washing machine?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jun 7, 2007, 05:54 PM
    Hold the timer dial while turning the timer knob to the left. The timer dial will then lift off a "D" shaped shaft.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washing Machine makes grinding noise when washing [ 1 Answers ]

I have a Maytag Performa washing machine - about 5 years old. It makes a grinding noise when washing. Spin cycle is still quiet. Any suggestions about what to check?

Kenmore washing machine timer dial knob [ 1 Answers ]

This older model of Kenmore top loading washing machine has the type of dial that pulls out to select and push in to start. My dial will pull out to select, but not really engage. Will push in but does not start the machine! Help! Don't know where to begin.

Toilet closest to washing machine gurgles and backs up when washing machine drains. [ 2 Answers ]

When the washing machine drains, the toilet in the next room gurgles and the bowl partially fills. I have taken these steps: Ran hose down vent pipe on roof. No backup noticed. Had plumber snake from outside wall cleanout by washing machine and 1/2 bath toilet to city sewer line in alley,...

Kenmore Timer Knob Removal [ 1 Answers ]

I have to replace the water temperature switch on my Kenmore Washer but am unable to rempve the timer knobs. How is this done? The timer knob actually consists of two knobs with a clear plastic disc between them.

Shower Knob Removal [ 2 Answers ]

I've replaced faucet washers before but never in this house (2.5 yrs in this old house). The knobs in the shower are hot and cold with the faucet in the middle for the batch. The knobs are mounted to the wall which is tiled. I removed the cap and unscrewed the screw in the middle of the knob, but...

View more questions Search