Ask Experts Questions for FREE Help !
Ask
    Raydawg's Avatar
    Raydawg Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 8, 2008, 08:23 AM
    Ceiling fan doesn't hang plumb
    I installed a Hampton Bay 52" Oakley ceiling fan with a 12" downrod on a 4/12 pitch ceiling.With the hanger bracket installed, I put the fan motor and downrod assembly in the ceiling bracket and wired it. When I slid the ceiling canopy up in place, there was a little interference with the downrod, but when I slid the canopy cover into place on the screws, the downrod and motor are not plumb and level. I can't believe these fans will not work on this shallow pitched ceiling. Must be a simple answer.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Jun 8, 2008, 08:44 AM
    Do you have the notch UP and is dimple in socket slot?
    Raydawg's Avatar
    Raydawg Posts: 2, Reputation: 1
    New Member
     
    #3

    Jun 8, 2008, 10:04 AM
    I figured out the problem, #1 the light box needs to be mounted with the screws at 3 o'clock & 9 0'clock position. Then when you mount the hanger bracket, the opening in the bracket needs to be in the downhill position allowing free movement of the downrod, and it all hangs on the centerline. I hope this help's the do-it yourselfers like me.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #4

    Jun 8, 2008, 12:38 PM
    It should move freely regardless, but it is best to have the downrod tab parallel to the ceiling slope.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Door jam out-of-plumb [ 1 Answers ]

I moved into a newly built house less than a year ago and the door between the Master Bedroom and Master Bathroom will not close. When we moved in last year, the door would close; but the gap narrowed at the top of the jam from the hinge side of the jam to the knob side of the jam. Now the top of...

In my arms by plumb [ 7 Answers ]

I heard this song in my arms and I know who sings it but I know that they mixed it. I heard the mixed version on XM and it was awesome. How do I find the remix?

Leak in basement plumb stack [ 1 Answers ]

I have a small leak in one of the connectors in the main plumb stack in the basement. The water running down (slowly) seems to be clear. What do I do? How can I find out where it is coming from. There is no odor. Thanks Conny

Need to plumb bathroom in concrete slab [ 7 Answers ]

We are having a pole garage built in Washington state and we need to put sewer pipes in the ground before they pour the concrete slab. We want a bathroom (toilet, sink and shower) and on the other side of the wall a utility sink. What size pipe should we use? We are open to layout of...

New Aqua Plumb faucet (low pressure) [ 3 Answers ]

I have read a lot of the postings and think I know why my new faucet has very low pressure now. I installed the entire new kitchen sink/cabinet this past weekend. It worked fine until yesterday. When I first turn on the hot or cold, it has very little pressure. When I turn the sprayer on and then...


View more questions Search