Ask Experts Questions for FREE Help !
Ask
    jwicks's Avatar
    jwicks Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 4, 2008, 07:41 AM
    How to change coolant in Ford 7.3diesel engine
    How do I change the coolant in the 7.3 diesel engine in my ford F250 truck?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Jun 4, 2008, 07:51 AM
    Every 30,000 miles or 3 years, whichever comes first:

    . Disconnect battery cables to both batteries.
    . Open radiator (degasser) cap and open drain cock, in order to drain the bulk of the old coolant from the system.
    . Remove two hex head engine drain plugs (one is above the starter and one is on the driver's side of the engine), to drain remaining coolant in engine block.
    . Close drain cock, replace engine drain plugs (apply teflon tape dope), and slowly add a 50/50 mixture of distilled water and Ford Premium Green Antifreeze (Ford Spec. ESE-M97-B44-A). Total capacity is 32 quarts.
    . Add 10 oz. of Supplemental Coolant Additive (FW-16). Do this every 15,000 miles, to prevent cavitation damage--rear two cylinders are prone to damage. Test with Fleetguard test strips.
    . Reconnect battery cables, start engine, and allow truck to reach normal operating temperature. Check coolant level, after engine cools.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Engine filled with coolant and is mixed with oil [ 11 Answers ]

I was wondering why my temperature gauge was going up so high, although the engine didn't actually get too hot. I couldn't understand why the coolant wouldn't remain in the radiator and I filled it up several times. I Checked the oil a couple days ago and the dipstick was covered about 7 or 8...

01 malbu engine temp sensor coolant leak [ 2 Answers ]

I have a leak coming from the engine temp sensor. I need to know the procedures for changing this and what tools are needed to this and are there any special tools or steps that need to be taken to this?

Is a1998 ford escort 2.0l 4 cyl. Engine a interference engine or not? [ 3 Answers ]

I broke my timing belt last week. I have a '98 Escort w/a 2.0L 4 cyl. Engine. The shop where it got towed to says that it's an interference engine. First off, I called my nephew in NH who has been a mechanic for the past 18 years & he said it's not an interference model. I then checked out The...

01 malbu engine temp sensor coolant leak [ 1 Answers ]

Thanks for your reply txgreasemonkey. Now should the new sensor come with a new o-ring and the space is very tight where the sensor is located. Any tips to removing and replacing without cracking my knuckles to death?

97 cevy cavalier - coolant leak - appears to be external on engine head [ 1 Answers ]

I have a 97 Cev cavalier and it slowly consumes engine coolant. The leak apperas to be coming from the head gasket but its external only. Is there some sealant that I can apply externally to stop the leak?


View more questions Search