Ask Experts Questions for FREE Help !
Ask
    ezyone4u's Avatar
    ezyone4u Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 22, 2007, 01:15 PM
    01 malbu engine temp sensor coolant leak
    I have a leak coming from the engine temp sensor. I need to know the procedures for changing this and what tools are needed to this and are there any special tools or steps that need to be taken to this?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Mar 22, 2007, 01:42 PM
    Pretty straight-forward operation, usually involving these steps:
    . Drain antifreeze to just below sensor level,
    . Remove connector and sensor,
    . Install sensor with a new O-ring,
    . Torque to somewhere around 15 ft.-lbs. and
    . Button things up.
    korn6958's Avatar
    korn6958 Posts: 23, Reputation: 1
    New Member
     
    #3

    Jul 6, 2007, 11:32 AM
    Quote Originally Posted by ezyone4u
    I have a leak coming from the engine temp sensor. I need to know the procedures for changing this and what tools are needed to this and are there any special tools or steps that need to be taken to this?
    Are you shure it is the temp sensor and not the lower intake gaskets cause they are known to leak on 3100 and 3400 motors but if not just a 7/8 wrench and careful not to break the new temp sensor

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Engine filled with coolant and is mixed with oil [ 11 Answers ]

I was wondering why my temperature gauge was going up so high, although the engine didn't actually get too hot. I couldn't understand why the coolant wouldn't remain in the radiator and I filled it up several times. I Checked the oil a couple days ago and the dipstick was covered about 7 or 8...

Coolant Temperature Sensor [ 2 Answers ]

I need to replace the coolant temperature sensor on a 2001 Ford Explorer Sport, 6 cyl, 2WD. Can anyone tell me where on the engine to look to find this component? Randy

97 cevy cavalier - coolant leak - appears to be external on engine head [ 1 Answers ]

I have a 97 Cev cavalier and it slowly consumes engine coolant. The leak apperas to be coming from the head gasket but its external only. Is there some sealant that I can apply externally to stop the leak?

Coolant Temp [ 1 Answers ]

I Have A 2001 Impala The Temp Gage Does Not Work And A Code Reader Says Coolant Temp Below Thermostat Regulating Temp Do You Think It Is A Bad Coolant Temp Sensor ?


View more questions Search