Ask Experts Questions for FREE Help !
Ask
    sarah0125's Avatar
    sarah0125 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 29, 2008, 10:53 AM
    Max distance from junction box to 1/2 emt
    What is the max distance from a junction box to 1/2 inch emt?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    May 29, 2008, 12:34 PM
    Can you re-phrase the question?
    The way it is written it makes no sense.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    May 29, 2008, 01:58 PM
    Should be less than zero between box and conduit.
    Do you mean maximum distance between 2 junctions with 1/2" conduit between.
    If PVC, you may need expansion couplings depending on length.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Another Junction Box ? [ 9 Answers ]

Again, thanks to everyone for all their valuable information as I wire up my Recording Studio addition. :) You guys are great! ;) I have another question reference the use of Junction boxes. On a couple of my framed walls, where I wired in outlets, some of the outlets (for like Exit Signs) are...

Outdoor junction box [ 2 Answers ]

The house I bought has an GFI outlet in the middle of the back yard (they had a pool). I want to remove that outlet and place it further at the back of the property. Is there a issue with splicing the old wires to new ones w/wire nuts, putting them in a small junction box & burring it?

15A off a 20A junction [ 2 Answers ]

Is it OK to take a single 15A line off a 20A branch circuit. Specifically, I have a new 20A kitchen wall circuit which will exist only of two 20A counter GFCI outlets. I have had to rework that wall for the gas stove and want to run a 15A outlet for the gas stove electrics. Can I just take a 15A...

Junction Box size [ 2 Answers ]

I have and oven with 10/3 mc cable attached. I am going to splice this to a 10/3 romex cable that I pulled from the sub panel. Is a metal 3" deep single gang box big enough? How many cubic inches do I need? Thank you

Critical Distance is Pipe Length or Literal Distance? [ 2 Answers ]

Is critical distance measurement based on the literal distance from a trap to the vent stack, or the total length pipe from the trap to the vent? In other words, if the trap is 4 feet from the vent, but the drain pipe from the trap to the branch that has the vent connected to it is 10 feet, is the...

View more questions Search