Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Removing stuck bathtub spout
[ 1 Answers ]
I am trying to remove a bathtub fill spout that has a pipe thread near the water outlet. With a mirror I can see the end of what looks like a copper male threaded fitting. It looks like it has plenty of calcium/mineral buildup. I am hesitant to apply too much force with a lever since the...
Tub spout
[ 2 Answers ]
I have a tub spout with a diverter the diverter has to remain up or else I will leak down my basement. Now it leaks every time after a shower. Help
Stuck tub spout
[ 1 Answers ]
I have a front threaded tub spout that I need to replace since the diverter is old and is not working properly. I've tried using a screwdriver in the spout end to twist off spout but I can't break it loose. It is the original tub spout ~ 9 years. Any ideas?
Tub spout
[ 2 Answers ]
Can a spout with a pop-up knob be used to replace a normal spout that didn't have a pop-up from the beginning ?
Tub Spout
[ 3 Answers ]
I have an old tub spout with diverter that I am trying to replace. The pipe underneath has a 1 1/4" adapter attached that has been in place for 10 years. My question is how do I remove that adapter? I know heating it is an option, but what should I use that won't melt the plastic tub wall, and how... View more questions Search
|