Ask Experts Questions for FREE Help !
Ask
    kd3yt1's Avatar
    kd3yt1 Posts: 7, Reputation: 1
    New Member
    		  
    #1

    May 28, 2008, 09:19 AM
    Starter Motor Problems
    Noma Sentintel Riding Mower
    Briggs and Stratton 12 HP Engine Model 282707 0110
    Starter Motor Part Number 693054

    Went to fire up mower for first time this season this past weekend. First thing I did was charge up the battery. Tried to start and nothing, not even a click. Kept trying and it fired up but when I shut it down it would not restart. Tried jumping solenoid switch and cleaning connections and still not start. Finally I took a screwdriver and tapped the starter while trying to start. It would spin if I tap it but not enough for starter gear to engage flywheel and spin engine.

    Does this sound like bad brushes or maybe just dirty brushes? Should I try cleaning it up and replace brushes or do I need to have it rebuilt or by a new starter..

    Thanks
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    May 28, 2008, 07:30 PM
    Both.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Starter turns but will not turn motor [ 1 Answers ]

I have a mtd 12.5 hp riding mower... I have done all tests on switch solenoid and by passed these and the starter mower will take off but when it engages to flywheel it seems to stop turning... the flywheel is not hard to turn therefore I'm thinking it still might be starter... the starter turns...

Starter, could the mechanic have caused more problems? [ 1 Answers ]

What are the steps to changing a starter on a 1996 honda accord?

Dc starter motor [ 1 Answers ]

I need step to step repair of car starter motor and diagram,thanks

1998 honda Accord starter problems [ 2 Answers ]

I have the same problem with my 98 accord as was posted many months ago and wondered if anyone had solved their problem. I just tried to start the car and although the starter could be heard spinning, it didn't engage the ring gear and so the engine didn't turn over. I have removed the starter...

Problems with 16.5hp B&S Motor [ 8 Answers ]

I have a 16.5 HP B&S motor, OHV. I have replaced the ignition switch, the battery, the solenoid and the fuel soleninoid. The motor ran when shooting starting fluid in it and dies right down. I pulled the main carb jet out and cleaned it, it appeared gummed up. The mower had been running fine...

View more questions Search