Ask Experts Questions for FREE Help !
Ask
    f16doctor's Avatar
    f16doctor Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 25, 2008, 10:12 AM
    Murray won't start
    My solenoid shelled on my murray rider so I replaced it. I have a new battery but when I try to start it, it has a click at the solenoid. The power gets to the lights, but nothing to the engine. What can I do to get the engine to turn over?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    May 25, 2008, 03:49 PM
    Check the ground connection at the solenoid, also be sure the starter is not hung up on the flywheel.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray won't start [ 1 Answers ]

My murray caught on fire last year from loose fuel line, but not badly damaged. I have replaced all burnt parts (fuel line, fuel and air filter, belts, muffler, and plug). I inspected all wires and found only 2 burnt completely: a yellow wire from start switch/coil, and black wire from sp. Plug....

Murray won't start but turns over [ 2 Answers ]

My murray ridding mower had a blade dissengage swith that had broken off its mount. So I taped the switch in so it would start, but this only worked till tape gave loose. I cut wires and wired both yellows together and both blacks together, and the extra black that jumped off it went to nothing so...

Murray Rider won't start [ 2 Answers ]

Have a Murray Rider mower new spark plug and battery but I can't get it to do anything... Don't know where to start on it... any suggestions.

Murray 11hp won't start, help please... [ 5 Answers ]

Hi, I have a little bit older model Murray riding lawnmower with the 11hp B&S engine. Im not sure exactly what year or model, the number I got off the engine and entered into B&S's website said it was not found?? But anyway, I have a brand new battery, power cables, solenoid, key ignition and...

Murray rider won't start [ 8 Answers ]

Ive got a fully charged battery, the starter just chugs a little, Not enough to start it up, and the red connection at the starter Heats up and smokes. Is the starter bad, or do I have electrical problem elsewhere? I think I just replaced the starter last summer. Help?

View more questions Search