Ask Experts Questions for FREE Help !
Ask
    chasme's Avatar
    chasme Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 21, 2008, 05:46 AM
    Parts for equipment
    I have a mtd with front tine tillers that shows built in 1996 model number
    216-390-000 and have not been able to get any parts for it from any of the
    Parts web sites. Do you have any suggestions?
    Thanks
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    May 21, 2008, 04:12 PM
    There is also a diagram and parts at Parts & Accessories | Shop & Find Lawn & Garden, Appliance Parts at Sears Parts Direct | SearsPartsDirect.com from Sears

    MTD has been bothersome right now. Even if parts are not avaiable from MTD, there may be an aftermarket source to tap. MTD and Searspartsdiirect will not tap those sources.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Have 20 amp equipment with 15 amp plugs [ 2 Answers ]

Hello and thanks for the help. I have a 20 amp piece of equipment and 15 amp plugs. I found an adapter online. Will this work or do I need to have things rewired? I'm in an apartment so not sure what to do? What would it cost to do this rewiring if necessary? Thanks, Mike

DJ Equipment? [ 1 Answers ]

If anyone could send me in the right direction it would be greatly appreciated. What I'm looking for is some inexpensive DJ equipment. Primarily an AMP. It's a hobby I do for friends at party's, not looking for High end stuff, just something I can hook my Laptop to as well as a ION DJ Station and a...

Book Value and yrs used of equipment [ 1 Answers ]

If it was recorded that a piece of equipment had a book value of 49,000. Was purchased for 74,000. Had a salvage value of 4,000. And 14 yrs of useful life. How long has the company owned the equipment?

Pool Equipment [ 1 Answers ]

I'm making an "as-is" offer on a house with a 25x30' in ground pool with an 8x13 spa at one end of it. It is not filled. I can't see any cracks but the tile around the edge is gone in a few places by the edge of the spa where it meets the pool. The equipment is sitting out in the open (heater,...

View more questions Search