Ask Experts Questions for FREE Help !
Ask
    dast's Avatar
    dast Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 16, 2008, 10:43 AM
    Kenmore 80 Series Dryer not heating
    On all settings, the dryer heats up slightly, takes 60 minutes. To dry a few pieces of clothing
    Is this my heating element??
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    May 16, 2008, 11:11 AM
    Gas or electric. Post the full model # please.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heating element Kenmore 70 series electric dryer [ 6 Answers ]

When I start the dryer the heating element gets hot for about 5 seconds then blows a fuse. The dryer will still cycle, but never get hot again. I replaced the fuses and no luck. When I took the plate off I can see that it is getting hot. There are 5 coils and it appears that the top 3 coils are...

Kenmore 80 series gas dyer not heating up to dry [ 1 Answers ]

Kenmore 80 series gas dyer will not heat up to dry the clothes in the dyer, but it will start.

Kenmore 80 series clothes dryer not heating properly [ 1 Answers ]

Greetings all! I've reviewed some previous posts about this particular appliance and got some great information, but my problem seems to be unique. The dryer only gets hot (warm really) when set on the hottest temperature setting. All others - No heat. Any thoughts? Thanks in advance....

Kenmore Dryer (90 Series) not heating up [ 1 Answers ]

My Kenmore Dryer (90 Series) is not heating up. I have replaced the Hi-Temp thermostat and thermal cut-off devices. The coil is good (~10.1 ohms). When I detach one of the wires from the circuit, I measure about 80 volts (AC) between the heating coil and the operating thermostat or ~110 v...

View more questions Search