 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
New power cord for bass amp
I have a old bass amp with a 2-conductor cord & plug. Lately, I've been working in a basement studio & I've been getting shocks if I touch the microphone while I'm playing. Would changing to more modern 3-conductor power cable solve this problem? If so, how to I attach the third (ground) wire to the amp & how do I decide which wire goes to the wider pin?
|
||||
|
||||
|
When I was a kid, I use to get shock from Pinball machines, and would simply remove plug from outlet an plug in reversed.
3 Conductor would be good, be sure hot and neutral are correct, If it doesn't shock you the other direction then remember and now you know which needs to be neutral and which needs to be hot. Be Careful, Good Luck. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
What is the product code for the power cord for canon s450 printer Where can I buy it? Roberto - moved from Forum Help
I just bought this home and its plugged into the service entrance power pole by a 20' SJ type power cord. I want to replace the cord with 3-#6's and 1-#8 (same amount and size wire in the cord) placed in PVC conduit 18" below ground level, from the pole to the mobile home, in other words, Hard-Wire...
What is the best method to fish for bass?
OK you can't leave an extension cord in place over 90 days. So as long as the wire size is OK for the load at that length, can I buy a 20' one, cut the end off and hardwire it in as a 20' power cord? I am talking a motorized screen for in a church. The directions say 14-18 wire. I should be...
View more questions Search
|
