Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing Mobile Home Power Cord.
[ 4 Answers ]
I just bought this home and its plugged into the service entrance power pole by a 20' SJ type power cord. I want to replace the cord with 3-#6's and 1-#8 (same amount and size wire in the cord) placed in PVC conduit 18" below ground level, from the pole to the mobile home, in other words, Hard-Wire...
Canon S450 printer blinking lights
[ 4 Answers ]
I have a Canon S450 that isn't working. It gives a series of blinking lights--one long green and six shorter yellow/orange lights. Does anyone know what this means?
Long power cord
[ 4 Answers ]
OK you can't leave an extension cord in place over 90 days. So as long as the wire size is OK for the load at that length, can I buy a 20' one, cut the end off and hardwire it in as a 20' power cord? I am talking a motorized screen for in a church. The directions say 14-18 wire. I should be...
Canon S450 printer help
[ 4 Answers ]
I have a Canon S450 printer and recently needed to change color ink jet. Since doing this I keep getting messages such as: Error writing to LP1 and also my printer lights are flashing. 1 green, 6 yellow, 1 green. Can anyone give me help in getting this printer going again? View more questions Search
|