Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Kenmore 80 Series Washer won't spin
[ 1 Answers ]
I was running my Kenmore 80 series washer and when it came to the spin cycle the water would drain, but it would not spin and is making a kind of clicking sound. So, I am trying to figure out what is going on. I am trying to get the back off the machine, but am also having difficulty there. Thanks...
Kenmore 80 Series washer doesn't spin...
[ 1 Answers ]
I have a Kenmore 80 Series washing machine. Yesterday it stopped spinning. It fills up with water and then makes this fast clicking noise when it should start spinning or agitating. Any ideas on what might be the problem?:confused:
Kenmore Series 80 washer will not spin
[ 4 Answers ]
The water drains, the motor runs, but no spin. The lid switch is good--just replaced two weeks ago. Is there an out of balance switch that may be faulty? Please any guidance is appreciated. Guy
Kenmore 90 Series Washer Won't Spin/Aggitate
[ 3 Answers ]
My washer fills up with water and then make a loud pounding/clicking type sound when it supposed to aggitate. It drains and makes the same sound during the rinse cycle. When it get to the spin cyle, it continues the sound, but stills drains and completes the cycle in the normal amount of time. I...
Kenmore 90 Series Washer No Spin
[ 2 Answers ]
I have a Kenmore 90 series washer about 6 years old that everything works fine but won't spin. It aggitates fine but won't spin. If you catch it before it spins and turn the dial back to aggitate and while it is aggitating you spin the tub backwards then go to spin it will spin just fine. I do know... View more questions Search
|