Ask Experts Questions for FREE Help !
Ask
    bud007's Avatar
    bud007 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 29, 2008, 07:36 PM
    Why does frost build up on ice dispenser shute
    Whirlpool side by side refrigerator

    Mod.# ED22PWXDWOO


    For the last month are so I have noticed frost build up on my ice dispenser inside the door. It is where the ice comes out the hole going into the door.
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Apr 30, 2008, 06:24 AM
    I would first check to see if the flap that seals the opening in the door is secure. If that is leaking warm air from the kitchen into to freezer, you would get frost buildup.

    Good Luck,
    WallyH
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Frost in attic [ 4 Answers ]

24 by 40 house on cement slab, twenty yrs old. Roof is well vented, (just added more vents) and two feet of insulation added on top of the original. Frost forms on inside of roof on north side. The north and east walls have frost with changes to water and leaks out onto floor close to N and...

Frost on the inside [ 2 Answers ]

I have a question Id like to see if anyone can help me with before I call a service tech. On the inside of my A/C unit where it meets up with the furnace I have a lot of frost build up on the copper lines. I am new to the central air and have always had swamp coolers. I changed the filter and...

Frost bite [ 1 Answers ]

Why does frost bite become black and seem like a burn(electric, black n singed)... with the blisters as well?:confused:

Maytag Refrig has Water at Bottom - Drain is Fine and No Frost Build Up [ 4 Answers ]

Maytag refrig (Model # MTB2156DEW) has puddle of water at bottom. The drain is fine and there is no frost build up. I would appreciate any help. Thank you

Frost removal [ 1 Answers ]

I accidentally washed part of the sandy/frosting stuff off the globes from our overhead light fixtures. I was able to completely remove it from one of them but the other two are being more stubborn. What might I use to more easliy remove this stuff from the others?

View more questions Search