Ask Experts Questions for FREE Help !
Ask
    gtuttlepi's Avatar
    gtuttlepi Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Apr 27, 2008, 04:51 PM
    Murray will not engage in gear
    I moved the lever that disengages the transmission back & forth but it will not reengage into gear. I got underneath it & I can see that the what I think is a wheel turning when I push the gear forward or backwards but it still will not engage.
    Any help welcomed
    Garry
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Apr 28, 2008, 04:44 PM
    Check the linkage connection where the release hooks up.
    gtuttlepi's Avatar
    gtuttlepi Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Apr 28, 2008, 04:52 PM
    Mowerman, I was underneath the machine & moving the linkage back & forth & I could see it moving in & out near the transmission but it still wouldn't re-engage the gears. So maybe I am seeing something that I think I am seeing but I am open to anything. Good it be the clutch that is not engaging? But if this were the case it would be in gear when I move it back & forth like it is while disenganged.
    Garry
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray 12.5 HP 38" Cut Won't Go Into Gear [ 2 Answers ]

I have a Murray Riding Mower that is two years old. It worked great since I've had it. I went to start it up for the first time for this year and it wouldn't start. I had to charge the battery and then it started right up. But it will not go into gear. I put in 1st, 2nd, or Reverse and nothing...

Will not engage gear [ 1 Answers ]

My tire recently went flat on my Wizard Hydrastatic lawn mower and had to take the tire off to get it aired up. When got the tire off, the axil came with it. With that, oil (I'm assuming gear oil or hydrastatic fluid) came out, I got the tire aired up but now the tire will not lock in and comes...

Blades won't engage in high gear. [ 4 Answers ]

I have a 2001 Troybilt tractor, 23hp with a 50" cut. It runs great and blades engage and cut in low gear. However when in high gear the blades disengage. Anybody got any idea on what could be the problem? Email me please @ [email protected]. Thanks

Murray Lawn Tractor will not engage the trans [ 1 Answers ]

iI have a Murray lawn tractor that will not endage the transmission. When I release the lever from the push mode to the drive mode it's still in the push mode. It's a model 425620X92A. CC

14 hp murray will not go in gear [ 1 Answers ]

14 hp murray trnsmission will not engage. I can push it in any gear while off. Will not engage when on. Thanks

View more questions Search