Ask Experts Questions for FREE Help !
Ask
    mthortis's Avatar
    mthortis Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 19, 2007, 06:24 AM
    Will not engage gear
    My tire recently went flat on my Wizard Hydrastatic lawn mower and had to take the tire off to get it aired up. When got the tire off, the axil came with it. With that, oil (I'm assuming gear oil or hydrastatic fluid) came out, I got the tire aired up but now the tire will not lock in and comes out easily also the gears will not engage?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Sep 19, 2007, 06:37 PM
    There is a clip inside that holds the axle inside the transaxle.
    Remove the transaxle, clean thouroughy, and open the transaxle housing up, then replace the damaged clip, reinstall the transaxle and go back to mowing.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blades won't engage [ 1 Answers ]

I have a Rally, made for Craftsman, model 18544B, 18.5 HP Briggs, 42 inch cut. I am told it was made byAYP. Blades have stopped engaging. I have replaced the PTO switch. Following the wires some lead to a plug in into the mower that is in the base of the frame on the right side, just above the...

Blades won't engage in high gear. [ 4 Answers ]

I have a 2001 Troybilt tractor, 23hp with a 50" cut. It runs great and blades engage and cut in low gear. However when in high gear the blades disengage. Anybody got any idea on what could be the problem? Email me please @ [email protected]. Thanks

Heat pump will not engage [ 2 Answers ]

Hello all, My name is Scott I live in Alabama. About a year ago we had a new heat pump and air handler installed in our house every thing has been great until now when I tried to turn on the air I receive a bunch of different carracters on the digital screen of thermostat and the outside unit...

Engine starts, won't engage [ 3 Answers ]

I have a 16.5 hp Craftsman Lawn Tractor (2001) Worked fine one day. Next day started fine, engaged and ran about five feet, jerked a few times. I shut off, checked it out. It started right up again, but would not engage. No motion forward or reverse. Sears tech support suggested parking brake...

Ride on blade will not engage [ 1 Answers ]

Cadet ride on lawn mower with safety feature of disengage cutting blade... now blade will not reengage... reset button? Help !

View more questions Search