Riding mower blade

yami57 Posts: 2, Reputation: 1

New Member

Apr 27, 2008, 01:04 AM

Riding mower blade

Hi, I have an older snapper riding mower, why does the blade rotate when its not engaged?

MOWERMAN2468 Posts: 3,214, Reputation: 243

Ultra Member

Apr 28, 2008, 04:16 PM

The belt could be too tight.

Add your answer here.

Check out some similar questions!

Weedeater Riding Mower, Blade won't engage [ 2 Answers ]

We have a Weedeater riding lawnmower model 733-848 or HD12538j. The blade will not engage and I found a spring that fell out. I can't tell by the manual where it goes.

Troy-Bilt riding mower blade removal [ 1 Answers ]

I'm trying to remove the blades but the nut on both blades won't budge. I sprayed them both with WD40 but still not happening. I got the mower up on jack stands so that I could at least sharpen the blades but they are in bad shape and still cut rough. I didn't want to try and loosen the nuts while...

Removing riding mower blade [ 4 Answers ]

I am unable to remove my mower blade on my craftsman riding mower LT1000. I removed the top nut but I am unsure if I knock down the shaft with a hammer or take it off another way please help so I can sharpen my mower blades. Thank you mike

17.5 Murray riding mower 3 blade deck belts [ 5 Answers ]

I have this riding mower and need to know the # for the blade engage belt. The one on there is too big..

Sears Craftsman Riding Lawn Mower Blade adjustment [ 1 Answers ]

My Sears Craftsman 42" cut riding lawnmower has 2 blade decks. With the height adjustment lever in the highest position (or in any position), the left blade/deck cuts lower than the right. How do I adjust the left blade deck/blade to a higher position?l