 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Replace an egr sensor on a 2002 ford explorer 4.0L
I need to replace the EGR pressure sensor on a 2002 Ford Explorer with a 4.0L engine. I have the part but I am having a hard time locating its location on the engine. Can anyone tell me its specific location? A picture of it would be helpful. Thanks!:confused:
|
||||
|
||||
|
The DPFE is normally located behind the throttle body, along the firewall--look for two hoses going to it. Frequently, they don't need to be replaced, just cleaned. Clean all related hoses, while you are at it. Using a quality full-synthetic engine oil, with a low NOACK Volatility rating, will greatly reduce EGR-related problems.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I need to remove the door panel for the passenger side to replace the exterior mirror assembly. I've googled for directions or a diagram but am coming up short. Do you know if the how to for this is available somewhere online? Thanks!
My 2002 ford explorer power door locks started acting up lately. The door ajar light stays on even though all the doors are close. But I notice that the problem is mostly with the liftgate. If I open it and slam it shut, that usually will allow me to lock the explorer. Any help is appreciated.
I need to get a hold of a diagram to remove the door panel to fix the power window
My door locks keep locking and unlocking by themselves. How can I disconnect this system and control the door locks manually?
My Ford Explorer started flashing the over drive off light. What dose this mean? I have not noticed any difference in performance.
View more questions Search
|
