Ask Experts Questions for FREE Help !
Ask
    shortwreckerman's Avatar
    shortwreckerman Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 19, 2008, 06:28 PM
    Craftsman 42 inch cut with 15 hp briggs
    I have not fire to plug
    I changed plug still no fire
    How do you test ignitiion system
    Or does anyone know how it is wired and how to disable safety at a central place?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Apr 19, 2008, 07:07 PM
    If the engine spins when you are trying to start, then remove the blower housing (top) and locate the coil. Remove the small black wire from the coil and see if you have spark then, if so the kill wire is bad. If not, then the coil itself is probably bad. This is only true if the engine spins when you try to start it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman Riding Mower 23 Kohler hp 24 inch deck [ 11 Answers ]

I recently went out to mow my lawn with this otherwise reliable machine. I pulled the PTO clutch switch to engage the blades. They started to rotate and I was on my way, for about 30 seconds and then the blades stopped rotating. The motor runs perfectly yet the drive unit for the blade belt does...

Craftsman LT 1000 42 inch deck [ 16 Answers ]

I replaced the drive belt and a pulley that were broken. Now it will not move. It is an automatic. What actually makes the tractor move. The belt turns but doesn't go anywhere. Thanks

Craftsman 42 inch cut with 15 hp briggs [ 1 Answers ]

I have not fire to plug I changed plug still no fire How do you test ignitiion system? Does anyone have a wireing diagram?

18.5 hp 46 inch cut Craftsman Tractor [ 1 Answers ]

I just bought this tractor. A craftsman 18.5 hp 46 inch cut I need 2 things 1 is the plate for the deck for the mulch kit. Two is someone took the deck off at one time or another and did not put it back on the right way I am not sure how to make corrections I need a diagram or something any ideas?...

Craftsman 14.5 42 inch riding lawn mower gear sector [ 2 Answers ]

How do you replace the gear sector22 teeth on craftsman riding lawn mower?

View more questions Search