Ask Experts Questions for FREE Help !
Ask
    CSStuff's Avatar
    CSStuff Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 15, 2008, 01:52 PM
    Matag washer only delivers Hot water
    I have a Matag washer model #MAV6057AWW.
    It works fine, except it will only deliver Hot water, regardless of the buttons pushed.
    I pulled off the back and have narrowed it down to either:
    The Temp switch (behind the buttons) or the valve switchs (connected to the cold and hot inlets).
    My question is, which one would it most likely be before I order parts.

    Thanks, Stan
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Apr 15, 2008, 06:04 PM
    The first thing I would do is remove the cold water hose from the back of the washer and insure that the screen is clear and that cold water is getting to the washer. Next I would remove the seloniod valves and using jumper wires see if they work when electricity is applied directly.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Matag Clothes Washer [ 1 Answers ]

My Matag washer vibrates out of control during rinse and spin cycle, it just started all of a sudden, and now does it no matter what size the load is. The Model number is LA412, their must be a balancer of some sort, that fell off or What?

Matag Washer, How do I remove Agitator? [ 3 Answers ]

I have a newer Matag Toploading washer (model starts with LAT8506) and the tub won't spin. I'm trying to work on it, but I can't get the agitator off. I've tried pulling up very hard (there is no bold down the center hold). I'm guessing that the clutch won't let go, or there's a transmission...

No water to both sinks / very low cold water pressure to bath and washer [ 1 Answers ]

My kitchen and bathroom sink have no water, period. Hot water seems to be pretty good to the bath and washer but cold water to those 2 locations are very weak. The outside faucet is very weak at best. I have had this problem for quite some time so it's not the fact that they are frozen. I just...

Matag Neptune washer stops... [ 2 Answers ]

Help, my matag Neptune Washer Model # mah3000aww Serial #18138894sz Washer is stopping, and not completing a cycle, it also appears that it no longer spins the clothes, it is pumping the water out. I've taken the front off, and am trying to decide if the motor is bad or the motor control...

View more questions Search