I have a Matag washer model #MAV6057AWW.
It works fine, except it will only deliver Hot water, regardless of the buttons pushed.
I pulled off the back and have narrowed it down to either:
The Temp switch (behind the buttons) or the valve switchs (connected to the cold and hot inlets).
My question is, which one would it most likely be before I order parts.

Thanks, Stan

The first thing I would do is remove the cold water hose from the back of the washer and insure that the screen is clear and that cold water is getting to the washer. Next I would remove the seloniod valves and using jumper wires see if they work when electricity is applied directly.