Ask Experts Questions for FREE Help !
Ask
    sunspot's Avatar
    sunspot Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 6, 2008, 04:29 PM
    Won't start
    I have a murray riding lawn mower and I went to start it and it did nothing.. how do I check the solenoid.. or what do I need to check?. battery is fine
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Apr 7, 2008, 07:47 PM
    Check the fuse first.
    slimepig's Avatar
    slimepig Posts: 3, Reputation: 1
    New Member
     
    #3

    Apr 8, 2008, 10:51 AM
    I also had to cross the solinoid on mine to start. I figured it was the ignition switch and replaced that. It still won't start. Fuse is fine, solinoid and ign. Switch are new. Im thinking it's the stupid safety switches. One for the seat, one for the clutch, and one for the blade. Where can I find schematics or pictures with instructions on getting to these switches and fixing them?? Can I just cut the switches out of the links??
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #4

    Apr 8, 2008, 05:27 PM
    Contact a Briggs and Stratton dealer for diagrams, they now own Murray.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Saturn won't start, power locks won't work, radio resets itself. [ 4 Answers ]

My 99 Saturn has had some starting problems in the past. It would sometimes not start but if you let it sit from anywhere from 45 minutes to 24 hours, it would eventually start. Or, after having Dad look at it, we could tap the starter and it would work. So we thought it was the starter. I...

93 Civic won't start, turns over but won't crank [ 4 Answers ]

I have a 1993 honda del sol SI that I converted to manual, before the swap everything was fine, cranked up, my battery and alterntor were going bad but would crank up, after the swap, it turns over but nothing happens,I'm not gettting any spark at all, I went and got a new distributor but still...

Generator won't Start [ 2 Answers ]

Hello all, I own a 10 hp briggs and stratton generator that will not start. I have checked my oil level and found that it was slightly low. I filled it to the proper level. I also removed the spark plug and poured a teaspoon of gasoline in the cylinder: the engine fired up and ran. I know my...

Kenmore he4 panel won't work and dryer won't start [ 1 Answers ]

I have had the circuit board/panel replaced once on my he4. I had only 2 weeks left on the warranty and figured it should be OK once it was fixed. They wanted another $200 to renew the warranty! Didn't have the $$ at the time. Anyway, the same darn thing is happening... you have to push the buttons...

My PC won't start [ 2 Answers ]

Just installed windows xp 3 days ago, Now I put on my PC and it won't start... the lights donot even come on I changed the cords but it still won't work


View more questions Search