Ask Experts Questions for FREE Help !
Ask
    valkyriellc's Avatar
    valkyriellc Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 25, 2008, 06:33 PM
    Removing wire terminals from Honda plug
    Hi all,
    I'm replacing the ignition switch on my cousins 1999 accord and the new one came with the component missing that secures to the side of the lock cylinder. No problem as I though I would just remove the big black and white wire from the new plug and put it in the old plug that has the component wires installed. I made a tool to shove in the plug next to the terminal to release a clip but it won't budge. Any tricks? I may just need to keep trying as I see no other way to pull the terminals out.
    Thanks
    valkyriellc's Avatar
    valkyriellc Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Mar 25, 2008, 07:53 PM
    Figured it out. There are plastic tabs on the connector that need to be pryed then you can pull the terminal out. I was thinking there were metal tabs on the terminals.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

3 wire plug or 4 wire plug [ 1 Answers ]

Good day. I have an older style electrical generator for backup power for my house. It has 2, 20 amp 120 volt, 3 prong plug ins and 1, 20 amp 240 volt , 3 prong plugin( 3 wire). I am installing a manual transfer switch in my house with a plugin located on the outside of the house. The outside...

Romax type wire to plug conversion on furnace [ 10 Answers ]

Hello – about ten years ago I had a new gas hot water heater and gas furnace installed in my home. (Converted from electric heat & water talk about savings) The installers picked up the electric from a standard basement porcelain single bulb fixture (about 5 feet from the new equipment). The hot...

2 wire plug to 3 wire plug [ 1 Answers ]

I have a Hunter brand Hepa filter. I need to put a 3 prong plung on it so that it is grounded. How do I do this?

4 wire plug to 3 wire appliance [ 1 Answers ]

I have a 4 wire plug in the wall for my clothes dryer. How do I wire this into a 3 wire clothes dryer?

View more questions Search