Hi all,
I'm replacing the ignition switch on my cousins 1999 accord and the new one came with the component missing that secures to the side of the lock cylinder. No problem as I though I would just remove the big black and white wire from the new plug and put it in the old plug that has the component wires installed. I made a tool to shove in the plug next to the terminal to release a clip but it won't budge. Any tricks? I may just need to keep trying as I see no other way to pull the terminals out.
Thanks

Figured it out. There are plastic tabs on the connector that need to be pryed then you can pull the terminal out. I was thinking there were metal tabs on the terminals.