Ask Experts Questions for FREE Help !
Ask
    Lou Butcher's Avatar
    Lou Butcher Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 23, 2008, 12:18 AM
    MTD Yardbug
    I have cooked two cutter drive belts in 48 hrs. The first belt was as old as the machine. The second belt, is more than likely my stupidity.

    What I need to know what is the adjustment for the drive engagement and how much tension is required. Diagrams will be helpful.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Mar 23, 2008, 04:26 PM
    Well, I think you may have a bearing in a pulley or spindle going bad, or a pulley is locked up due to such.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

14 hp MTD Mower [ 3 Answers ]

I can not get my started. I have replaced the battery, fuel filter, and spark plug. I have spark, there is gas getting into the head, it turns over great but will not fire. There is power going to the bowl on the carb.

Changing drive belt on MTD Yardbug mower [ 0 Answers ]

I have a Mtd Yardbug mower, and need to know how to change the upper drive belt. It appears the belt was laid down, then the mower was built around it.

Mtd tractor [ 2 Answers ]

After running for a while, when I stop it doesn't want to start back up?

View more questions Search