Ask Experts Questions for FREE Help !
Ask
    JJMMPR3's Avatar
    JJMMPR3 Posts: 9, Reputation: 1
    New Member
    		  
    #1

    Aug 18, 2006, 04:05 PM
    Mtd tractor
    After running for a while, when I stop it doesn't want to start back up?
    superkid778's Avatar
    superkid778 Posts: 47, Reputation: 2
    Junior Member
    		  
    #2

    Aug 18, 2006, 05:28 PM
    Mine did this... faulty blade safety switch... 12 dollar fix
    JJMMPR3's Avatar
    JJMMPR3 Posts: 9, Reputation: 1
    New Member
    		  
    #3

    Aug 19, 2006, 03:46 PM
    Where would locate this part... engine, underneath?

    Thanks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No start ayp lawn tractor [ 3 Answers ]

OK I have a AYP 22hp kohler with a electric pto clutch. The engine won't turn over with the key switch . I can jump the key switch and it will run. It will stay running as long as I leave the clutch/brake pedal engaged. If I release the clutch or try to engage the blades it will die . At first I...

Mtd lawn tractor [ 6 Answers ]

I recently bought a used mtd lawn tractor, 38" deck, 7 speed manual ,12 hp I/c briggs engine. The tractor needs a new transmission belt. Because I don't have an owners manual or parts list, I don't know which belt to order. Does anyone know what belt I need?

Weedeater lawn tractor [ 7 Answers ]

I have a weedeater lawn tractor age unknown but 5-8 years guessing with a 12.5 briggs engine, went to start it last week and clicking was all I got so tried to manually turn crankshaft and it was froze, this week I got to tinkering with it and was able to turn shaft and it fired up like always,...

Bad solenoid in lawn tractor? [ 2 Answers ]

I was installing a new solenoid in my lawn tractor. The new solenoid posts were bigger than the eyelets in the cable connections. I drilled them out a bit. While tightening the cable connections onto the solenoid the posts in the solenoid began to spin... did I ruin the solenoid?:(

View more questions Search