Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to size Conduit 6-3
[ 4 Answers ]
I have 2 6-3 for a 60ft run and 1 6-3 for another run. Question, what size conduit do I use. This circuit is for a tankless water heater. All will in my garage which is drywalled.
Running pex under slab in pvc conduit
[ 1 Answers ]
I have a 10' run of 1/2" pex I want to run under a slab that will be poured. Everything I have read says that you must use a non-metallic elbow (such as PVC) to bring the PEx up through the slab. I am running this line for an island sink supply. I would feel more comfortable if I not only ran it...
Running -- supporting (?) EMT conduit
[ 1 Answers ]
Well, again I have a question that the NEC code book seems pretty vague on. I’m looking at Article 348 and 370 – on running conduit. What I’m doing is wiring my “pole barn” (see prev. posts & great ansrs/help on the “branch ckt” and the grounding”). The barn has what they call “girts” …...
Bath tub shower spout & head running water running at same time
[ 1 Answers ]
I started with a slight dripping problem(sayko system).i decided to replace all 3 stem assemblies together as they all were about 18 years old.after reassembling the new stems(danko brand),turned on the water supply & checked faucets.hot & cold worked fine but when the shower was turned on,water...
Do I need conduit?
[ 4 Answers ]
I have a panel in my garage for my garage based workshop. I want to run a 220 volt circuit (have have the capacity in the panel to do so). My question is whether I need to run the wire inside conduit or can I run romex without conduit. The wire will be behind drywall the entire way so it will... View more questions Search
|