Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical & Lighting (https://www.askmehelpdesk.com/forumdisplay.php?f=105)
-   -   Running Conduit (https://www.askmehelpdesk.com/showthread.php?t=196414)

  • Mar 19, 2008, 02:22 PM
    mr500
    Running Conduit
    Im about to run my feeder into my new workshop and was wondering when I drill down through the bottom plate and bring in my feeder, what's the codes say about this part of the wire having to be in conduit? I mean the part from the floor up to the bottom of my panel?

    Also, is it within code to use plain 12 awg (green) for pigtails on the grounds? I can't find plain copper in 12awg. Probably a stupid question there, but I just wanted to know. LOL
  • Mar 19, 2008, 04:59 PM
    Stratmando
    Ground can be green or bare. I would just run Conduit to panel, If PVC You can heat to make an offset, If Metal, you may need a bender.
    It can also be solid or stranded.
  • Mar 19, 2008, 06:20 PM
    mr500
    Ok PVC it is then

    Thanks
    Mike

  • All times are GMT -7. The time now is 07:40 AM.