Ask Experts Questions for FREE Help !
Ask
    tonydix's Avatar
    tonydix Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 18, 2008, 08:39 AM
    Coleman Powermate 2700 generator no output
    The engine starts and runs well but the generator does not produce any electricity.
    Interally there are no brushes so I assume it is one of the brushless type.
    There are 3 windings on the stator one feeds a 12 micofarad capacitor and the other 2 supply power to the two outlets via a cicuit breaker. The 3 windings have resistance of 15 ohms and about 4 ohms for each of the power windings. The cicuit breakers check out with continuity.

    Does anyone have any ideas about what further checks to make on this machine.
    Many thanks

    Tony
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Mar 21, 2008, 06:52 AM
    Is there a reset button to be pushed?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Generator power output cuts in and out [ 1 Answers ]

Bought a Coleman Generator a few months ago and I have it connected to an inverter. The inverter is connected also to 16 "deep cycle" batteries and usually powers the house from solar panels. Everything has been working terrific until last night when the generator began cutting in and out. It...

Generator is giving no output [ 1 Answers ]

I was wondering if anyone could help with my 2.5 kw diesel generator I started it up and it run it all day no problems then it cut the engine out and I tried starting it again and I would not start so I switched the 240v switch to 110v switch and then it started and run fine but when I switched...

Most output from generator [ 6 Answers ]

I plan on buying a portable generator to hook up my house for emergency power, going to instal a manual transfer switch. I was wondering most generators have numerous outlets on them do I have to rewire the panel on the generator to get max output or does the 240 receptacle put out the max, I plan...

Coleman Powermate Generator [ 3 Answers ]

My generator won't start. I used sta-bil fuel treatment and then stored it for 3 years. I drained the fuel out of the tank and carb bowl (it was dark yellow) and added fresh fuel. When I try to start it, nothing happens, I pull and pull until fuel comes out into the air cleaner. (flooded) What do I...

View more questions Search