Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
A/C Disconnect switch
[ 7 Answers ]
I am having a 36,000 BTU split system installed. This unit is 230/208v with 30 amp breaker. Instead of using the pull out style or lever style disconnects, would it be safe to use a 30 amp 120/277v a/c double pole toggle switch mounted in a appropriate weather proof box as my disconnect?
Noise from driveshaft.
[ 4 Answers ]
My 94 Honda Accord is making a cracking noise whenever I drive off turning right or making a right turn while accelerating. There is no noise if I do not accelerate when turning right. Could anybody tell me if the source of the noise is from the left shaft or the right one? I thought it is from...
Spa disconnect
[ 1 Answers ]
Does the spa box count as the disconnect or does there need to be one somewhere else? I am building a 12'x12' gazebo and the spa box will be on the outside. The wiring is going to come up through the concrete in steel conduit. To add a disconnect somewhere else would put it somewhere in the...
Honda CV Driveshaft Replacement
[ 7 Answers ]
Hi, all! I want to change a cv driveshaft on my 96 civic and the questions are are: 1. can I do it by myself in apartment parking lot (is it feasible at all)? 2. do I need to drain transfluid before replacing? I have honda repair manual, and it mentions something about a special tool -...
Driveshaft
[ 2 Answers ]
I have a honda accord EX / 4dr / 104K miles Just brought my car in to get two new back tires at WTC... I brought my car there before for tires mainly and oil change... mechanics called me to explain I need to replace the driveshaft because of wear and tear on the joints and boots is causing... View more questions Search
|