Ask Experts Questions for FREE Help !
Ask
    WasherHELP's Avatar
    WasherHELP Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 15, 2008, 12:57 PM
    Fridgerdare Washer Incomplete Cycle
    My Fridgerdare washer won't go through the entire cycle, it stops and leaves water sitting in washer, what can I do?
    mtmom's Avatar
    mtmom Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Mar 15, 2008, 01:49 PM
    Check to make sure the pump isn't clogged. If it is, you won't be able to spin or drain.
    hourlybardten's Avatar
    hourlybardten Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Oct 25, 2008, 06:01 AM

    My frigidaire dishwasher door won't close tightly.. the dishwasher goes through the cycles but nothing gets cleaned
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GE Select 11 cycle washer won't spin [ 1 Answers ]

I have a GE Select Washer, runs through all the cycles but won't spin, checked the belt, in good condition also checked to see if the motor is locked up, it is not, what could be the problem? Could it be the timing switch?

Kenmore washer will not go into spin cycle [ 1 Answers ]

My Kenmore washer will no longer go into spin cycle not a new model but has been faithfull up to now

Debris in washer after cycle [ 2 Answers ]

I just finished a load of wash in my washer. There is debris along the top of the washer Barrel. What could that indicate? The clothes weren't full of debris when I put them in.

Washer does not switch to rinse cycle [ 1 Answers ]

My Whirlpool washer goes through to the rinse cycle and then stops. If I turn dial into the rinse cycle zone it then continues. Does it sound like the timer has gone bad?

Washer does not finish cycle [ 3 Answers ]

I have a Whirlpool washer that is 2 and half years old. It stops working during a cycle, especially wash and rinse cycles. When I move the dail a bit and push the knob it starts again. This repeats until the cycle is finished. Repair technician states that it needs timer replacement which costs...

View more questions Search