Ask Experts Questions for FREE Help !
Ask
    bgc's Avatar
    bgc Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 11, 2008, 06:30 PM
    GE Select 11 cycle washer won't spin
    I have a GE Select Washer, runs through all the cycles but won't spin, checked the belt, in good condition also checked to see if the motor is locked up, it is not, what could be the problem? Could it be the timing switch?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Feb 11, 2008, 08:10 PM
    Have you tested the lid switch? It acts as a safety to keep unit from spinning with the lid up. If it goes bad, unit will not spin with lid down either
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washer will not go into spin cycle [ 1 Answers ]

My Kenmore washer will no longer go into spin cycle not a new model but has been faithfull up to now

GE Washer won't complete spin cycle [ 1 Answers ]

I bought my washer used. It works fine, until it gets to the spin cycle. It starts to drain, and after a few minutes it will begin to spin and stops. However, if it has no clothes in the tub, it will complete the spin cycle. Once in a while, it will complete the cycle with clothes in it, but it is...

Spin cycle on Kenmore washer [ 1 Answers ]

There is a broken switch on the underside of my Kenmore washer preventing the spin cycle from working. How hard is this going to be to fix?

Whirlpool Washer Spin Cycle [ 1 Answers ]

Just bought a new whirlpool washer (MD#: WTW5790SQ0), the spin cycle on the washer doesn't work on any cycle EXCEPT normal wash. This was determined by: closing the lid, selecting each individual spin option on the dial and pulling the knob out (starts washer). Both spin cycles work on the Normal...

View more questions Search