Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ducting for wood stove heat exchanger and related.
[ 2 Answers ]
Hello I have a wood stove in the basement capable of 70k BTU. I'm building a heat exchanger for it. I've seen similar configurations on other stove including a corn stove from Amazablaze and Cornflame. Most of these heat exchangers have a 12" round pipe for the heat exchanger exhaust... but I'm...
What is the advantage of R8 over R4.2 ducting insulation
[ 1 Answers ]
When upgrading my furnace is the replacement of all of the ducting from R4.2 to R8, if duct size is adequate, worthwhile? Also any thoughts on the quality of 3 ton 95% Goodman furnaces? Thanks again
Changing ducting on Wesco electric furnace
[ 6 Answers ]
I just found this site! Hopefully someone can guide me. I just bought a small old house - 1 story. It has a Wesco electric furnace, mfg date 12/27/1980. There are cold air return ducts in every room except bath, located at the bottom of the walls near the floor. The heat vents are located in...
What size ducting to buy?
[ 2 Answers ]
I am instaling a central heat and air unit in my home. It is a 2200 sf ranch style home and I have been told I need a five ton unit. What size ductwork will I need to install to heat and cool my home. If I just had ONE MORE power tool......
Ducting
[ 1 Answers ]
My old ducting is worn out and has several leaks in it and it is hard to get to. Is there a flexible type duct that I can pull threw the old duct work and make new connections at all the registers for a better air flow. View more questions Search
|