Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower diverter
[ 1 Answers ]
In my bathtub shower too much water comes out the bath faucet when I pull up the water diverter to shower leaving insufficient water going to the shower head. How do I fix this?
Shower Diverter
[ 2 Answers ]
Hello- We have a free standing claw foot tub and installed a shower ring about a year ago. We have had problems with our shower diverter before, and it had turned out that the o ring was old. Now this time after changing the o ring on the diverter ( pull up has a black little o ring and a cream...
Water pressure died after installing new diverter
[ 3 Answers ]
I recently installed new reccessed bathroom shower from kohler. It has single lever diverter. Water is diverted to shower by using knob on spout. After installing it, I found out that water pressure in spout and shower has decreaed by large amount. I can't say if its water pressure or water...
Installing shower diverter stem
[ 6 Answers ]
I am trying to replace a shower diverter stem. I took the old one off and screwed in the new one. When it's tightened all the way, there is no water flow. As I loosen it, the water begins to flow and I am also able to turn on the shower. But, that's no good because if it's too loose, it will fall... View more questions Search
|