Ask Experts Questions for FREE Help !
Ask
    peach01's Avatar
    peach01 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 25, 2008, 06:14 PM
    Kenmore ultra 665.15732000 won't do anything
    2 days ago, all the lights were blinking and no buttons were working. I did the button dance mentioned in these wonderful forums, where I have learned tons! Yesterday, I pulled off the front bottom panels, where I found the technical paperwork (who knew?) and started it empty. Guess what? It ran like a swiss watch. Today, I filled it with dishes and it stopped right in the middle of the rinse cycle while draining with no lights flashing at all. I am totally stumped and can't figure out what to do next. As I'm sitting here, it has started beeping! Should I kick it to the curb?
    biggsie's Avatar
    biggsie Posts: 1,267, Reputation: 125
    Ultra Member
    		  
    #2

    Feb 25, 2008, 07:45 PM
    This is probably a good place to start -- hope this helps

    Appliance Parts from RepairClinic.com - Troubleshooting: Dishwasher
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Ultra Wash Dishwasher model #665.1703, Flashing light-won't start [ 118 Answers ]

I have a Kenmore Ultra Wash Dishwasher. It will not start. The light above normal wash is flashing continuously. Any advice will be helpful. Our warranty ran out 9 days ago:rolleyes: Thank-you in advance:o

Kenmore ultra wash model 665 control lock [ 9 Answers ]

I have a Kenmore ultra Wash 665 SN# FH1513502 Model# 15955 my washer is in control lock and when I depress the start button the lED flashes three times, What is the problem and how do I correct it

Kenmore Dishwasher 665 Ultra Control Lock Reset? [ 3 Answers ]

I have researched previous unlock codes and can't find one that works. My Dishwasher is a Kenmore 665 Ultra 15951791. The upper latch got bent, my wife bent it to allow door to close and now the Control Lock light is on solid. This happened a couple of years ago and I found a reset code here on...

Kenmore Ultra 665.1596580 E8 door open error [ 3 Answers ]

My Kenmore Ultra starts a cycle and almost immediately goes to Door Open error - the repair guy who fixed my washing machine suggested it was the gasket - so we replaced that but we are still getting the error. Any more ideas? :confused:

View more questions Search