Ask Experts Questions for FREE Help !
Ask
    Rustywashy's Avatar
    Rustywashy Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2008, 07:11 PM
    Kenmore Ultra 665.1596580 E8 door open error
    My Kenmore Ultra starts a cycle and almost immediately goes to Door Open error - the repair guy who fixed my washing machine suggested it was the gasket - so we replaced that but we are still getting the error. Any more ideas? :confused:
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Feb 1, 2008, 08:01 PM
    Have you tested the door switch?
    Rustywashy's Avatar
    Rustywashy Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Feb 1, 2008, 08:13 PM
    Quote Originally Posted by esquire1
    Have you tested the door switch?

    How do I do that?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #4

    Feb 3, 2008, 09:17 AM
    YOu will unplug the unit and remove 1 wire from the switch. Depress switch and check for continuity. If non the switch is bad and need replacing. Unit will not run if door is open or the switch is bad
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Ultra Wash Dishwasher model #665.1703, Flashing light-won't start [ 118 Answers ]

I have a Kenmore Ultra Wash Dishwasher. It will not start. The light above normal wash is flashing continuously. Any advice will be helpful. Our warranty ran out 9 days ago:rolleyes: Thank-you in advance:o

Kenmore ultra wash model 665 control lock [ 9 Answers ]

I have a Kenmore ultra Wash 665 SN# FH1513502 Model# 15955 my washer is in control lock and when I depress the start button the lED flashes three times, What is the problem and how do I correct it

Kenmore Dishwasher 665 Ultra Control Lock Reset? [ 3 Answers ]

I have researched previous unlock codes and can't find one that works. My Dishwasher is a Kenmore 665 Ultra 15951791. The upper latch got bent, my wife bent it to allow door to close and now the Control Lock light is on solid. This happened a couple of years ago and I found a reset code here on...

Kenmore Ultra Wash with gunk in door panel [ 2 Answers ]

I have a Kenmore Ultra Wash about 8 yrs old. Dishes come out cloudy and spotted. I see a lot of greasy gunk on the bottom edge of the door panel and it appears to be inside the little round, slotted part on the top of the door panel. Any suggestions?

View more questions Search