Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hesitation about Fernco Neoprene Coupling hidden in wall...
[ 6 Answers ]
Hello again, (you guys rock) I am converting my cast stack to pvc and am concerned about the transition point. I was hoping to use a PVC NO-Hub band 'donut' at the a particular cast hub but it doesn't look like that's possible. My question is: Are those couplings reliable enough to install...
Does a Fernco Qwik-tee qualify as a directional Wye fitting?
[ 3 Answers ]
I'm putting in a basement bath, connecting with a 4" cast iron main that is in excellent condition. 1) Before installation, the city inspector told me we need a directional Wye fitting there. He hasn't been back yet since the installation. My plumber installed a 4 x 4 Fernco Qwik-tee. The...
Fernco Plumbqwik Tee Uses
[ 9 Answers ]
I'm adding a 1/2 bath to my house and have cast iron pipes leading out to the sewer. I have heard that people use the soft black plastic plumbqwik qwik-tees with the metal bands to tighten onto the cast iron for both ease of install and because they are compatible with the cast iron. What I had...
Azo coupling
[ 1 Answers ]
Whydoes azo coupling at ortho position of 1-naphthol occur if para position is occupied? And why does diazonium coupling ortho position or para position of phenol?
Fernco under slab - sround with Concrete?
[ 1 Answers ]
I bathroom addition to the basement quickly progressed to replacing all the sewer lines. I have used 4" PVC and a fernco where I tied in to the 4" CI right before it goes through the footer and out to the street. Someone gave me the advice that I should use concrete and in case the fernco... View more questions Search
|